RD—60HTMicrowave drying equipment for wood furniture

　　Main technical parameters：

　　○1Product model：RD—60HT

　　○2Power input: three-phase five wire380±10% , 50Hz±1%

　　○3working frequency： 2450MHz±50MHz

　　○4Rated input apparent power：≤90KVA

　　○5Microwave output power：≤60KW（Adjustable power）

　　○6Overall dimensions (L * w * h)：15500×1240×1850 mm

　　○7Inlet and outlet height：85mm

　　○8Conveyor width：900mm

　　○9transmission speed：0.5～5m/min

　　○10Water efficiency: about 60 kg per hour

　　○11Control: ordinary button type, can add PCL, man-machine interface control, temperature control, monitoring device

　　○12Microwave leakage: according to the national GB10436-89 standard (GB = 5mw/cm2)

　　Accord with national GB5226 electrical safety standard

　　○13work environment：－5~40℃，relative humidity≤80%

　　There is no corrosive gas, conductive dust and explosive gas
　　Furniture, especially solid wood furniture products in the production of wood drying is the most headache problem. Wood way in China from the beginning of the liberation of steam drying study of former Soviet Union and the introduction of wood processing methods are still in use. In this way, although the process is stable, but the energy consumption, time consuming, more difficult to grasp the hard tree, deformation, use the temperature gradient of traditional heating method for drying wood caused by cracking, shrinkage and other issues, and the use of microwave equipment to dry wood can improve the utilization rate of wood.
　　1, wood shape is good, can be directly dried by microwave drying of semi-finished wood. The wood, it can completely eliminate the internal stress of the wood, and wood products can be used for drying process by the beginning. Always break the furniture production process is the first board, wood lumber drying process after cutting into parts processing, to the first the board, wooden furniture material according to the structure of the first processing into various specifications of the straight, curve, and then into the microwave drying. In this way, one side will no longer be in the processing of leftover materials (about 30%) in the process of drying, sawdust, wood shavings (about 15%) were not into the kiln, both to save energy and improve the utilization rate of drying kiln; in addition, because the first feeding and then drying the wood original defects no longer extension, can improve the utilization rate of 15% - 20% of wood, its economic benefit is significant.
　　2, selective heating, fast drying speed, saving energy. A remarkable characteristic of microwave drying of wood is selective, high moisture content, part of the microwave absorption, heat generation, and the heat generated is small, and the wood is the internal heat, no thermal inertia, no heat transmission loss, so dry faster than the traditional steam heating method is 10 times faster, thereby saving energy.
　　3, microwave drying wood can keep the primary color of wood can also be insecticidal sterilization