RD—10HFCHoneycomb ceramic shaping drying equipment

　　Main technical parameters：

　　○1Product model：RD—10HFC

　　○2Power input：Three-phase380±10% ,50HZ

　　○3working frequency： 2450MHz±50MHz

　　○4Rated input apparent power：≤15KVA

　　○5Output microwave power：≤10KW（Adjustable power）

　　○6Overall dimensions (L * w * h)：1250×1200×2150 mm

　　○7Internal diameter：Φ850 mm

　　○8Rotary speed: 8 rpm/min

　　○9Drying efficiency: 10Kg per hour

　　○10Time controller, "hours, minutes, seconds" arbitrary adjustable

　　○11Microwave leakage: in line with national GB10436-89 standards(National standard≤5mw/cm2)

　　Comply with GB 5226 electrical safety standard

　　○12work environment：－5~40℃，relative humidity≤80%

　　There is no corrosive gas, conductive dust and explosive gas．
　　Microwave ceramic stereotypes drying equipment is mainly used in honeycomb ceramics, technical ceramics, high voltage insulation porcelain, special ceramic stereotypes drying．
　　The microwave can penetrate inside the object inside are heated at the same time, the frequency is 2450MHZ, 2 billion 450 million times a second concussion, between the molecular friction heat, self heating; conventional heating such as flame, hot air, heating, steam drying is the use of the principle of heat conduction, the heat from the heated external internal, and gradually make the object the center temperature, called external heating. In order to make the center reaches the desired temperature to a certain time, poor thermal conductivity of objects required longer time. These traditional drying methods, large power consumption, heating is not uniform, up and down, the labor intensity is big. The advantages of microwave ceramic drying equipment are: 1, the quality of products drying and shaping good, no cracking.2, easy to control, convenient and flexible operation. Automatic control of heating time and drying temperature 3, time saving, high yield.4, energy consumption.5, Production intensity is small, covers an area of less.6, labor saving, the province of the process, in particular, and easy to connect with the front and rear automatic line, reducing the number of handling.7, environmental protection, clean, clean, pollution-free, and will not produce the "three wastes" problem．