RD—35HTMicrowave drying curing equipment for stone material

　　Main technical parameters：

　　○1Product model：RD—35HT

　　○2Power input: three-phase five wire380±10% , 50Hz±1%

　　○3working frequency： 2450MHz±50MHz

　　○4Rated input apparent power：≤52KVA

　　○5Microwave output power：≤35KW（Adjustable power）

　　○6Overall dimensions (L * w * h)：11600×1200×1750 mm

　　○7Inlet and outlet height：50mm

　　○8Conveyor width：650mm

　　○9transmission speed：0.5～10m/min（frequency control）

　　○10Water efficiency: about 35 kg per hour

　　○11Control: PCL, man-machine interface control, with temperature control, monitoring device

　　○12Microwave leakage: in line with national GB10436-89 standards(National standard≤5mw/cm2)

　　Accord with national GB5226 electrical safety standard

　　○13work environment：－5~40℃，relative humidity≤80%

　　The relative humidity of microwave curing stone is penetrating the fast curing by microwave heating. The curing rate than the conventional fast, good uniformity, energy saving, but also can be used for rapid drying and curing of artificial marble, ceramics, glass fiber, nano materials, dry type foam ceramic etc. can be used for activated carbon, zirconium chloride oxygen hydrogen zirconium oxide, zirconium oxide, aluminum oxide, cobalt oxalate, zirconium carbonate, zirconium sulfate is ammonium zirconium carbonate, zirconium silicate, potassium zirconium carbonate, oily ink driers, water-based ink anti crosslinking agent, expandable graphite, ceramic zirconium oxide, iron oxide, thermal material, TC components.