RD—30HTNickel hydroxide microwave drying equipment

　　Main technical parameters:

　　○1Product model：RD—30HT

　　○2Power input: three-phase five wire380±10% , 50Hz±1%

　　○3working frequency： 2450MHz±50MHz

　　○4Rated input apparent power：≤45KVA

　　○5Microwave output power：≤30KW（Adjustable power）

　　○6Overall dimensions (L * w * h)：12500×980×1800 mm

　　○7Inlet and outlet height：50mm

　　○8Conveyor width：650mm

　　○9transmission speed：0.5～5m/min

　　○10Water efficiency: about 30 kg per hour

　　○11Control: ordinary button control, temperature control, monitoring device

　　○12Microwave leakage: in line with national GB10436-89 standards(National standard≤5mw/cm2)

　　Accord with national GB5226 electrical safety standard

　　○13work environment：－5~40℃，relative humidity≤80%

　　There is no corrosive gas, conductive dust and explosive gas.

　　Microwave heating is a new heating mode. When heating, the microwave can directly act on the medium molecules converted into heat, because the microwave penetrating properties make the heating medium and at the same time, no need to heat conduction, so the heating speed is very fast, the water content in the chemical material below 35%, the drying speed can be shortened at the same time hundreds of times. No matter any shape, because the heating medium objects inside and outside at the same time, the temperature difference between inside and outside the material of small, uniform heating, will not produce coke endogenous in conventional heating, the drying quality is greatly improved.

　　Microwave heating compared with conventional heating, has the following advantages: high efficiency, no energy consumption, the uniform heating, the drying speed is fast, the thermal inertia, the safety and environmental protection, the operation is simple, easy to control. The objects absorb microwave energy into heat, body temperature, body containing water will evaporate, so as to achieve dry.