RD—30HAManganese sulfate microwave drying calcining reduction equipment

　　Main technical parameters：

　　○1Product model：RD—30HA

　　○2Power input： Three-phase380±10% ,50HZ;

　　○3working frequency： 2450MHz±50MHz

　　○4Rated input apparent power：≤30KVA

　　○5Output microwave power：≤20KW（Adjustable power）

　　○6Overall dimensions (L * w * h)：1760×1450×2200 mm

　　○7Internal diameter of rotary table：Φ850×1700mm(Dial three)

　　○8Drying water extraction efficiency: hourly30Kg

　　○9Time controller, "hours, minutes, seconds" arbitrary adjustable

　　○10Control: ordinary button control, temperature control, monitoring device

　　○11Microwave leakage: in line with national GB10436-89 standards (National standard≤5mw/cm2)

　　Comply with GB 5226 electrical safety standard

　　○12work environment：－5~40℃，relative humidity≤80%

　　There is no corrosive gas, conductive dust and explosive gas．

　　It is used for drying, heating and sintering powder, granular, paste and paste materials,Cellulose, mannitol, lithium cobalt oxide, graphite, carbon brush, silicon carbide, nickel hydroxide, strontium carbonate, barium carbonate, nano material, accelerant, refractory material, potassium chlorate, calcium oxide, aluminum oxide, manganese sulfate, activated carbon, heating, drying, sintering and reduction reaction.

　　It can be used for forming ceramic sintering, such as piezoelectric ceramic, ceramic technology, ceramic packing, honeycomb ceramic quick drying stereotypes. Microwave curing by microwave rapid curing, drying, shaping. Compared with the conventional fast curing speed, good uniformity, and energy saving.

　　Case: Jiangmen Changshun Chemical Co. Ltd. nickel hydroxide dry, sintered silicon carbide Guangdong three Yuan Chemical Co. Ltd.; Jiangxi Xinhua Cao Industry Co. Ltd drying. Nanjing jinwe Chemical Co. Ltd. accelerant drying to solve the steam drying after the original tide phenomenon, greatly improving the production efficiency.