RD—100HTAluminium silicate refractory drying equipment

　　Main technical parameters：

　　○1Product model：RD—100HT

　　○2Power input：Three-phase five wire380±10% , 50Hz±1%

　　○3working frequency： 2450MHz±50MHz

　　○4Rated input apparent power：≤150KVA

　　○5Output microwave power：≤100KW（Adjustable power）

　　○6Overall dimensions (L * w * h)：21000×1320×1800 mm

　　○7Inlet and outlet height：70mm

　　○8Conveyor width：1000mm

　　○9transmission speed：0.5～5m/min

　　○10Water efficiency: about 100 kg per hour

　　○11Control: PCL, man-machine interface control, temperature control, monitoring device

　　○12Microwave leakage: in line with national GB10436-89 standards(National standard≤5mw/cm2)

　　Comply with GB 5226 electrical safety standard

　　○13work environment：－5~40℃，relative humidity≤80%

　　There is no corrosive gas, conductive dust and explosive gas
　　Aluminum silicate fiber board after rinsing, molding, vacuum filtration, drying and curing process. It has made the following characteristics: 1, low thermal conductivity, low heat capacity.2.3, thermal shock resistance and excellent thermal stability, high strength and good toughness.4, excellent machining performance.
　　Advantages of microwave equipment:
　　There is a big difference compared with the traditional heating method, microwave heating and traditional heating method relies on heat by radiation, conduction, convection, and other ways, first make the surface of the heated object, and then through the heat conduction, the temperature inside from the outside to the inside gradually increased. Most of the objects within the heat transfer speed is very slow, such as rubber material, so to achieve the object overall heating needs for a long time. At the same time easily lead to uneven heating objects, affecting the quality of the heating object, or even change the heating object color, composition and physicochemical properties of nutrition, and microwave heating with heating material - unique overall heating, the microwave heating has the following advantages:
　　1, through heating, heating speed, uniform heating
　　2, selective heating, energy saving and high efficiency
　　3, there is no thermal inertia, that is, real-time, so to ensure the quality of processing materials
　　4, easy to operate, suitable for control
　　5, environmental protection, clean and health
　　6, safe and sound